INSTRUMENT PANEL SPEAKER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT DOOR SCUFF PLATE LH (for Side)

    Click here

  2. REMOVE FRONT DOOR OPENING TRIM COVER LH (for Side)

    Click here

  3. REMOVE FRONT DOOR NO. 2 OPENING TRIM COVER LH (for Side)

    Click here

  4. REMOVE FRONT PILLAR GARNISH LH (for Side)

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side)

    Click here

  6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY (for Side)

    Note

    Do not touch the cone part of the speaker.


    1. B004CQ9

      Remove the 2 screws.

    2. Disconnect the connector and remove the front No. 1 speaker assembly.

  7. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY (for Center)


    1. B004ALDC01
      B004CG0 Protective tape

      Apply protective tape to the areas shown in the illustration to prevent damage in the following procedures.

    2. B004AZ4

      Insert the moulding remover B between the instrument safety pad sub-assembly in the position shown in the illustration and create a gap.

    3. B004CRQ

      Using moulding remover A in the gap created in the previous procedure, detach the claws.

    4. B004BIHC01
      B004B1M Remove in this Direction

      Move the No. 1 speaker opening cover assembly in the direction indicated by the arrow shown in the illustration.

    5. B004AVGC01
      B004B1M Remove in this Direction

      Detach the claw in the direction indicated by the arrow shown in the illustration.

    6. B004A4TC01
      B004B1M Remove in this Direction

      Detach the claw in the direction indicated by the arrow shown in the illustration and remove the No. 1 speaker opening cover assembly.

  8. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for Center)

    Note

    Do not touch the cone part of the speaker.


    1. B004B2N

      Remove the 2 screws.

    2. Disconnect the connector and remove the front No. 2 speaker assembly.