ROOF HEADLINING DISASSEMBLY

PROCEDURE


  1. REMOVE COAT HOOK


    1. B000YM3

      Detach the claws and remove the coat hook.

      Tech Tips

      Use the same procedure for the opposite side.

  2. REMOVE ACTIVE NOISE CONTROL MICROPHONE

    Click here

  3. REMOVE TELEPHONE MICROPHONE ASSEMBLY (w/ Telematics Transceiver)

    Click here

  4. REMOVE TELEPHONE MICROPHONE ASSEMBLY

    Click here

  5. REMOVE ROOF HEADLINING HOLDER COVER


    1. B000UXL

      Detach the claws and remove the roof headlining holder cover.

      Tech Tips

      Use the same procedure for the opposite side.

  6. REMOVE ROOF SILENCER PAD (for Carbon Roof)


    1. B000X4Q

      Remove the roof silencer pad.

  7. REMOVE NO. 1 ROOF WIRE


    1. for Glass Roof:


      1. Remove the tape from the roof headlining assembly.

        B000V8VC01
        *A for LHD *B for RHD
        *a 90° - -
        B000WCG Tape - -

      2. Turn the visor connectors approximately 90° counterclockwise and disconnect from the roof headlining assembly.

      3. Detach the clamps and remove the No. 1 roof wire from the roof headlining assembly.

      4. Remove the butyl tape.

    2. for Carbon Roof:


      1. Remove the tape from the roof headlining assembly.

        B000UVUC01
        *a 90° - -
        B000WCG Tape - -

      2. Turn the visor connectors approximately 90° counterclockwise and disconnect from the roof headlining assembly.

      3. Detach the clamps and remove the No. 1 roof wire from the roof headlining assembly.

      4. Remove the butyl tape.