ELECTRONIC SHIFT LEVER SYSTEM DTC CHECK / CLEAR


  1. CHECK FOR DTCS (TRANSMISSION)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Transmission / Trouble Codes.


      Powertrain > Transmission > Trouble Codes

    5. Check for DTCs and freeze frame data, and then write them down.

      Tech Tips

      GTS Display Description
      Test Failed Shows the malfunction judgment results during the current trip.
      Pending Shows the malfunction judgment results up to now. (Indicates the possibility of a malfunction when no DTC is confirmed.)
      Confirmed Shows the DTCs confirmed up to now. (The number of current trips differs for each DTC.)

      Test Failed DTC, Pending DTC and Confirmed DTC are record freeze frame data respectively.

  2. CHECK FREEZE FRAME DATA


    1. If a DTC is present, select it in order to display its freeze frame data.

    2. Read the freeze frame data recorded when the DTC was stored.

  3. CHECK FOR DTCS (CAN BUS CHECK)


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: CAN Bus Check.


      CAN Bus Check

    5. Check for CAN communication system DTCs.

      Tech Tips

      If any CAN communication system DTCs are output, perform troubleshooting for the CAN communication system first.

      Click here

  4. CHECK FOR DTCS (EXCEPT TRANSMISSION)

    Tech Tips

    The shift control ECU maintains communication with other ECUs. Therefore, if the DTC related electronic shift lever system is output, it is necessary to check and record the DTCs of all systems.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Health Check.

    5. If DTCs are output, check the relevant systems.

      Tech Tips

      If DTCs for the CAN communication system are present in addition to other DTCs, first troubleshoot and repair any malfunctions in the CAN communication system.

  5. CLEAR DTCS

    Note

    Clearing the DTCs will also clear the freeze frame data.


    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Transmission / Trouble Codes.


      Powertrain > Transmission > Clear DTCs

    5. Clear the DTCs and freeze frame data.