ACCELERATOR PEDAL INSTALLATION

PROCEDURE


  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.


    1. for LHD:


      1. Install the accelerator pedal sensor assembly with the 3 nuts.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

        Note


        • Do not drop the accelerator pedal sensor assembly, strike it with tools or subject it to impact.

        • If the accelerator pedal sensor assembly is subjected to an impact, replace it with a new one.

      2. Connect the accelerator pedal sensor assembly connector.

    2. for RHD:


      1. B000UONN03

        Connect the accelerator pedal sensor assembly connector.

      2. Install the accelerator pedal sensor assembly with the nut A and nut B.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

        Note


        • Do not drop the accelerator pedal sensor assembly, strike it with tools or subject it to impact.

        • If the accelerator pedal sensor assembly is subjected to an impact, replace it with a new one.

      3. Install the nut C.

        Torque:
        7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

        Tech Tips

        Depress and hold the foot brake using brake pedal pressure to ensure enough installation space for nut C.

      4. Install the stop light switch assembly.

        Click here

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

    Click here

  3. INSTALL MAIN BODY ECU (for RHD)

    Click here

  4. INSTALL ACCELERATOR PEDAL


    1. Install the accelerator pedal with the 2 bolts.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
  5. INSTALL ACCELERATOR PEDAL PAD


    1. Attach the 4 claws to install the accelerator pedal pad.