REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   INSTALL REAR COMBINATION LIGHT ASSEMBLY

   
   

   1. Engage the grommet.

   2. 

      *a	Pin
      *b	Guide
      	Install in this Direction

      Engage the 3 guides and pin to temporarily install the rear combination light assembly as shown in the illustration.

   3. Install the rear combination light assembly with the 2 screws.

   4. Remove the protective tape.

   5. Connect the connector.

2. Click here

   INSTALL REAR COMBINATION LIGHT COVER

   
   
   1. 

      Engage in this Direction

      Engage the 2 claws as shown in the illustration.

   2. 

      	Area to Push
      	Install in this Direction

      Push the areas shown in the illustration in the direction indicated by the arrow to engage the 3 claws and install the rear combination light cover.

3. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH (for LH Side)

   Click here

4. Click here

   INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER RH (for RH Side)

   Click here

5. Click here

   INSTALL REAR FLOOR FINISH PLATE

   Click here

6. Click here

   INSTALL LUGGAGE COMPARTMENT DOOR STRIKER COVER

   Click here

7. Click here

   INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

   Click here

8. Click here

   INSTALL SPARE WHEEL COVER TRAY

   Click here

9. Click here

   INSTALL SPARE WHEEL COVER ASSEMBLY

   Click here