FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY


    1. Apply MP grease to the sliding parts of the fuel lid lock with motor assembly.

    2. Connect the connector.

    3. Engage the claw to install the fuel lid lock with motor assembly.

    4. Engage the clamp.

  2. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. B004I5MC01
      B006ZFL Install in this Direction (1)
      B006WSJ Turn in this Direction (2)

      Install the fuel filler opening lid lock retainer as indicated by the arrows, the order shown in the illustration.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  4. INSTALL REAR FLOOR FINISH PLATE

    Click here

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  6. INSTALL SPARE WHEEL COVER TRAY

    Click here

  7. INSTALL SPARE WHEEL COVER ASSEMBLY

    Click here