PANORAMIC MOON ROOF SYSTEM Remote Control System does not Operate

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or wireless transmitter*. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear assembly) receives the signals and activates the sliding roof motor.


CAUTION / NOTICE / HINT

Note


  • The panoramic moon roof key-linked function and panoramic moon roof wireless transmitter-linked function are operative when the power window customize settings "Door Key P/W Up", "Door Key P/W Down", "P/W Down W/Transmit" and "P/W Down W/Transmit" are set to "ON" using the GTS. (The default setting of each is "OFF".) (w/o Canister Pump Module)

  • The panoramic moon roof key-linked function is operative when the power window customize settings "Door Key P/W Up" and "Door Key P/W Down" are set to "ON" using the GTS. (The default setting of each is "OFF".) (w/ Canister Pump Module)

  • If the sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.

    Click here

  • The panoramic moon roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

    Click here

  • If a sliding roof ECU (sliding roof drive gear assembly) or roof sunshade ECU (sliding roof drive gear assembly) DTC is output, perform troubleshooting for the DTC first.

    Click here

  • Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.*


    • *: w/ Smart Entry and Start System

  • The vehicle battery supplies power to the main body ECU (multiplex network body ECU) via the door control battery. Therefore, before performing this troubleshooting procedure, make sure to perform an on-vehicle inspection to confirm that the main body ECU (multiplex network body ECU) power source circuit is normal.*

    Click here


    • *: w/ Door Control Battery

PROCEDURE


  1. CHECK REMOTE CONTROL FUNCTION


    1. Check the key-linked and wireless transmitter-linked functions.

      Click here

      Result
      Result Proceed to
      Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked* functions. A
      The sliding roof does not operate by the key-linked or wireless transmitter-linked* function, but all of the power windows operate. B
      Both the power windows and roof glass do not operate by the key-linked or wireless transmitter-linked* function. C

      • *: w/o Canister Pump Module


    A

    USE SIMULATION METHOD TO CHECK Click here

    C

    GO TO POWER WINDOW CONTROL SYSTEM Click here

    B

  2. CHECK SLIDING ROOF OPERATION


    1. Check the sliding roof operation.

      Click here

      OK
      Sliding roof operates normally.
      Result
      Proceed to
      OK
      NG

    NG

    GO TO OTHER PROBLEM (Panoramic Moon Roof System does not Operate) Click here

    OK

  3. REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)


    1. Replace the sliding roof ECU (sliding roof drive gear assembly).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  4. INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)


    1. Initialize the sliding roof ECU (sliding roof drive gear assembly).

      Click here

      Result
      Proceed to
      NEXT

    NEXT

  5. CHECK REMOTE CONTROL FUNCTION


    1. Check the key-linked and wireless transmitter-linked* functions.

      Click here

      OK
      The key-linked and wireless transmitter-linked* functions operate normally.

      • *: w/o Canister Pump Module

      Result
      Proceed to
      OK
      NG

    OK

    END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)

    NG

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here