REAR SEAT RECLINING CONTROL CABLE INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR SEATBACK LOCK ASSEMBLY LH

   
   

   1. Install the rear seatback lock assembly LH with the 2 nuts.

      Torque:

      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

   2. 

      	Install in this Direction (1)
      	Install in this Direction (2)

      Engage the guide to connect the rear seatback lock assembly LH as shown in the illustration.

2. INSTALL REAR SEATBACK LOCK ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

3. INSTALL ROOM PARTITION BOARD RH

   
   

   1. Engage the 5 clips.

   2. Install the room partition board RH with the 2 clips.

4. INSTALL ROOM PARTITION BOARD LH

   
   

   1. Engage the 4 clips and 2 claws.

   2. Install the room partition board LH with the clip.

5. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

   
   

   1. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.

   2. Engage the 3 clips and 5 guides.

   3. Install the package tray trim panel assembly with the 2 clips.

6. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

   Click here

7. INSTALL REAR SEAT SHOULDER BELT HOLE COVER

   Click here

8. INSTALL INNER ROOF SIDE GARNISH LH

   Click here

9. INSTALL INNER ROOF SIDE GARNISH RH

   Tech Tips

   Use the same procedure as for the LH side.

10. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH

    Click here

11. CONNECT REAR SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

12. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD

    
    

    1. Install the luggage compartment trim inner pad.

13. INSTALL CENTER STOP LIGHT SET

    Click here

14. INSTALL REAR SEAT ASSEMBLY

    Click here

15. INSTALL SPARE WHEEL COVER ASSEMBLY

    Click here