Click here

FRONT SEAT ASSEMBLY(for Power Seat) DISASSEMBLY

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

Click here

PROCEDURE


  1. Click here

    REMOVE POSITION CONTROL ECU ASSEMBLY RH (w/ Seat Position Memory System)

    Click here

  2. Click here

    REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

    Click here

  3. Click here

    REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

    Click here

  4. Click here

    DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. B006ZRE

      Disconnect the rubber band of the separate type front seatback cover.

  5. Click here

    REMOVE FRONT SEAT FRONT CUSHION SHIELD


    1. B0071HQ

      Remove the clip.

    2. B00702KC01
      B006ZFL Remove in this Direction

      Disengage the guide as shown in the illustration.

    3. B006XN5C01
      B006ZFL Remove in this Direction

      Disengage the 2 claws as shown in the illustration.

    4. B006YFB

      Disengage the 3 guides to remove the front seat front cushion shield.

  6. Click here

    REMOVE FRONT SEAT CUSHION SHIELD (w/o Vertical Adjuster)


    1. B006ZJ6

      Disengage the 3 claws.

    2. B006ZZ0

      Disengage the claw and 2 guides.

    3. B006YJTC01
      *a Protective Tape
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.

    4. B0070JUC01
      B006ZFL Remove in this Direction

      Disengage the guide as shown in the illustration.

    5. B006X0G

      Disconnect the front power seat switch connector to remove the front seat cushion shield.

  7. Click here

    REMOVE FRONT SEAT INNER CUSHION SHIELD (w/o Vertical Adjuster)


    1. B00709T

      Disengage the 3 claws.

    2. B006XNRC02
      B006ZFL Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

  8. Click here

    REMOVE FRONT SEAT CUSHION SHIELD (w/ Vertical Adjuster)


    1. B00705U

      Disengage the 2 claws.

    2. B006XTR

      Disengage the claw and 2 guides.

    3. B006YE6C01
      *a Protective Tape
      B006ZFL Remove in this Direction

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and slightly pull the front seat cushion shield as shown in the illustration.

    4. B0071K6C01
      B006ZFL Remove in this Direction

      Disengage the guide as shown in the illustration.

    5. B006ZNJ

      Disconnect the front power seat switch connector to remove the front seat cushion shield.

  9. Click here

    REMOVE FRONT SEAT INNER CUSHION SHIELD (w/ Vertical Adjuster)


    1. B006ZX5

      Disengage the 2 claws.

    2. B0071HFC01
      B006ZFL Remove in this Direction

      Disengage the 2 claws and 2 guides to remove the front seat inner cushion shield as shown in the illustration.

  10. Click here

    REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. B006XGF

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  11. Click here

    REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. B006ZR4

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  12. Click here

    REMOVE SEAT ADJUSTER SHIELD CLAMP BRACKET (w/ Vertical Adjuster)


    1. B006ZKJ

      Remove the 2 screws and seat adjuster shield clamp bracket from the front seat cushion shield.

  13. Click here

    REMOVE FRONT POWER SEAT SWITCH

    Click here

  14. Click here

    REMOVE LOWER NO. 3 SEAT TRACK SPACER (for LH Side)


    1. B007017

      w/ Rear Seat Belt Warning System:


      1. Disengage the claw and 2 guides to remove the lower No. 3 seat track spacer from the front seat cushion shield.

  15. Click here

    REMOVE LOWER NO. 4 SEAT TRACK SPACER (for LH Side)


    1. B006XO0

      w/ Rear Seat Belt Warning System:


      1. Disengage the claw and 2 guides to remove the lower No. 4 seat track spacer from the front seat inner cushion shield.

  16. Click here

    REMOVE LOWER NO. 2 SEAT TRACK SPACER (for RH Side)


    1. w/ Rear Seat Belt Warning System:

      Tip:

      Use the same procedure as for the Lower No. 4 Seat Track Spacer (for LH Side).

  17. Click here

    REMOVE LOWER NO. 1 SEAT TRACK SPACER (for RH Side)


    1. w/ Rear Seat Belt Warning System:

      Tip:

      Use the same procedure as for the Lower No. 3 Seat Track Spacer (for LH Side).

  18. Click here

    REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. B006YNN

      Disengage the 2 hooks.

    2. B006XJ3

      w/o Vertical Adjuster:


      1. Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

        Tip:

        Disengage the 4 clamps first.

    3. B006XBQ

      w/ Vertical Adjuster:


      1. Disengage the claw and 4 clamps to separate the front seat airbag assembly wire harness.

        Tip:

        Disengage the 4 clamps first.

    4. B006Y41

      Disconnect the connector.

    5. Disengage the clamp.

    6. B006ZD1

      w/ Seat Heater System:


      1. Disengage the clamp.

      2. Disconnect the front seatback heater assembly connector.

    7. B0070BG

      Remove the 4 bolts.

    8. Disengage the 4 guides to remove the separate type front seatback assembly from the separate type front seat cushion assembly.

  19. Click here

    REMOVE FRONT SEAT HEADREST SUPPORT


    1. B006XGK

      Disengage the 3 hooks.

    2. B006Z8M

      w/ Seat Heater System:


      1. Disengage the clamp.

    3. B0071BT

      Open the 2 fasteners.

    4. w/o Rear Seat Belt Warning System:


      1. B006ZT7C01
        B006ZFL Remove in this Direction

        Disengage the hook as shown in the illustration.

      2. B006YDPC01
        *1 Seatback Cover Hook
        *a Pin

        Pull up the pin of the seatback cover hook as shown in the illustration and remove the seatback cover hook.

      3. B0071R4C01
        *1 Seat Cover Hanger
        *a Bracket
        B006ZFL Remove in this Direction

        Slide the bracket as shown in the illustration to disengage the hook and disconnect the bracket from the seat cover hanger.

    5. B0070PE

      Disengage the 4 claws and remove the 2 front seat headrest supports.

  20. Click here

    REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Remove the separate type front seatback cover with pad.

  21. Click here

    REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. B0071BKC01
      *a Screwdriver - -

      Using a screwdriver, disengage the 9 claws and remove the separate type front seatback cover from the separate type front seatback pad as shown in the illustration.

  22. Click here

    REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  23. Click here

    REMOVE FRONT SEAT AIRBAG ASSEMBLY

    Click here

  24. Click here

    REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. B0071MTC01
      *a Wire Harness Clamp
      *b Hook

      Disengage the wire harness clamp and disconnect the connector.

    2. Disengage the 2 claws and 2 hooks and remove the seatback climate control blower.

  25. Click here

    REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (w/ Vertical Adjuster)

    Click here

  26. Click here

    REMOVE FRONT SEATBACK SPRING SUB-ASSEMBLY (w/o Vertical Adjuster)


    1. B006YXH

      Disengage the 2 claws to separate the 2 front seatback edge protectors from the front seatback frame sub-assembly.

    2. B0070JJC01
      B006ZFL Remove in this Direction

      Remove the front seatback spring sub-assembly from the front seatback frame sub-assembly as shown in the illustration.

  27. Click here

    REMOVE FRONT SEATBACK EDGE PROTECTOR


    1. w/o Vertical Adjuster:


      1. Remove the 2 front seatback edge protectors from the front seatback spring sub-assembly.

    2. w/ Vertical Adjuster:


      1. Remove the 2 front seatback edge protectors from the lumbar support adjuster assembly.

  28. Click here

    REMOVE FRONT NO. 2 SEATBACK HOOK


    1. B00714G

      Remove the 2 front No. 2 seatback hooks from the front seatback frame sub-assembly.

  29. Click here

    REMOVE FRONT SEAT NO. 2 WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat No. 2 wire.

  30. Click here

    REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. B006X4EC01
      B006ZFL Remove in this Direction

      w/ Occupant Detection Sensor:


      1. Disengage the claw to separate the connector holder as shown in the illustration.

      2. B006YD7C01
        B006ZFL Remove in this Direction

        Disengage the claw to remove the connector holder from the occupant detection sensor wire harness as shown in the illustration.

    2. B006XNK

      w/ Seat Heater System:


      1. Disconnect the connector.

      2. Disengage the clamp.

    3. B006XWF

      Disengage the 10 hooks and remove the separate type front seat cushion cover with pad from the separate type front seat cushion spring assembly.

  31. Click here

    REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. B006Z2TC01
      *a Screwdriver - -

      Using a screwdriver, disengage the 14 claws and remove the separate type front seat cushion cover from the separate type front seat cushion pad as shown in the illustration.

  32. Click here

    REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)

    Click here

  33. Click here

    REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER ASSEMBLY (w/ Climate Control Seat System)


    1. B006ZWM

      Disengage the wire harness clamp and disconnect the connector.

    2. B0070OY

      Remove the 2 bolts.

    3. Disengage the hook and remove the seat cushion climate control blower assembly.

  34. Click here

    REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/ Vertical Adjuster)


    1. B00711P

      Disengage the claw.

    2. B0071I0

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover LH.

  35. Click here

    REMOVE LH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/ Vertical Adjuster)


    1. B006YA6

      Disengage the 4 claws to remove the LH seat reclining adjuster inside cover RH.

  36. Click here

    REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER LH (w/o Vertical Adjuster)


    1. B0071TG

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover LH.

  37. Click here

    REMOVE RH SEAT RECLINING ADJUSTER INSIDE COVER RH (w/o Vertical Adjuster)


    1. B0070FX

      Disengage the clamp and claw.

    2. B0070J5

      Disengage the 4 claws to remove the RH seat reclining adjuster inside cover RH.

  38. Click here

    REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)


    1. B006ZN2C01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield LH.

  39. Click here

    REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)


    1. B006XDVC01
      *a Hook
      *b Guide

      Disengage the hook.

    2. Disengage the claw and guide to remove the front seat lower cushion shield RH.

  40. Click here

    REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Click here

  41. Click here

    REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each clamp to remove the front seat wire.

  42. Click here

    REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (w/ Occupant Classification System)


    1. B006XVM

      Disengage the clamp and disconnect the connector.

    2. B006XG8C01
      *a Pin
      *b Engagement Point
      B006ZFL Disengage in this Direction
      B006WSJ Slide in this Direction

      Disengage the seat slide position sensor protector from the pin of the seat position airbag sensor as shown in the illustration.

    3. Slide the seat slide position sensor protector as shown in the illustration to remove it.

  43. Click here

    REMOVE FRONT SEAT NO. 3 WIRE (w/ Occupant Classification System)


    1. B006YDF

      Disengage the claw to remove the front seat No. 3 wire.

  44. Click here

    REMOVE FRONT SEAT CUSHION SPRING SUB-ASSEMBLY


    1. B006XIB

      Disengage the 6 hooks to remove the front seat cushion spring sub-assembly from the front seat adjuster assembly.

  45. Click here

    REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (w/o Vertical Adjuster)


    1. B006YF7

      Remove the 2 screws.

    2. Disengage the claw to remove the front seat cushion wire harness holder.

  46. Click here

    REMOVE FRONT SEAT CUSHION WIRE HARNESS HOLDER (w/ Vertical Adjuster)


    1. B006XCJ

      Remove the 2 screws.

    2. B006Z85C01
      B006ZFL Remove in this Direction

      Disengage the 2 claws.

    3. Disengage the guide to remove the front seat cushion wire harness holder as shown in the illustration.

  47. Click here

    REMOVE FRONT SEAT LOWER CUSHION SHIELD (w/ Vertical Adjuster)


    1. B0071HP

      Disengage the claw.

    2. B006Y1ZC01
      B006ZFL Remove in this Direction

      Disengage the guide to remove the front seat lower cushion shield as shown in the illustration.

  48. Click here

    REMOVE POWER SEAT LIFTER MOTOR ASSEMBLY (w/ Vertical Adjuster)


    1. Remove the power seat lifter motor assembly.


      1. B006X67

        Remove the 3 nuts and front seat adjuster plate.

      2. B0070EU

        Remove the vertical adjuster spacer.

      3. B0070TC

        Remove the front seat vertical housing sub-assembly.

  49. Click here

    REMOVE POWER SEAT TILT MOTOR ASSEMBLY (w/ Vertical Adjuster)


    1. B0070UQ

      Remove the 3 bolts and power seat tilt motor assembly.