FRONT DOOR LOCK INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative(-) auxiliary battery terminal notices before proceeding with work.

    Click here

  2. INSTALL FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY


    1. w/o Double Locking System:


      1. B004FW8

        Install the front door inside locking cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B004EA0

        Install the front door inside locking cable assembly as shown in the illustration.

      2. B004EYX

        Engage the 3 claws as shown in the illustration.

  3. INSTALL FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY


    1. B004GUO

      w/o Double Locking System:


      1. Install the front door lock remote control cable assembly as shown in the illustration.

    2. w/ Double Locking System:


      1. B004G5T

        Install the front door lock remote control cable assembly as shown in the illustration.

  4. INSTALL FRONT DOOR LOCK COVER SUB-ASSEMBLY (w/o Double Locking System)


    1. Engage the 2 claws.

    2. B004G32

      Engage the 2 claws to install the front door lock cover sub-assembly as shown in the illustration.

  5. INSTALL FRONT DOOR LOCK WITH MOTOR ASSEMBLY

    Click here

  6. INSTALL FRONT DOOR LOCK CYLINDER ASSEMBLY (for Driver Side)

    Click here

  7. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY (for Driver Side)

    Click here

  8. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  9. INSTALL FRONT DOOR UPPER WINDOW STOP

    Click here

  10. INSPECT FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  11. ADJUST FRONT DOOR GLASS SUB-ASSEMBLY

    Click here

  12. INSTALL FRONT DOOR SERVICE HOLE COVER

    Click here

  13. INSTALL OUTER MIRROR INSTALL HOLE COVER

    Click here

  14. INSTALL FRONT DOOR TRIM BRACKET

    Click here

  15. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

  16. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

  17. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

  18. INSTALL DOOR TRIM COVER

    Click here

  19. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  20. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

  21. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

  22. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  23. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

  24. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

  25. INSPECT POWER WINDOW OPERATION

    Click here