CANISTER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 FUEL SENDER GAUGE ASSEMBLY

   Click here

2. INSTALL CANISTER (FUEL TANK VENT TUBE ASSEMBLY)

   Click here

3. INSTALL REAR FLOOR SERVICE HOLE COVER

   Click here

4. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

6. CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

7. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side.

   Click here

8. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

9. INSTALL BATTERY SERVICE HOLE COVER LH

   Click here

10. INSPECT FOR FUEL LEAK

    Click here

11. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

12. INSTALL REAR SEAT CUSHION ASSEMBLY

    Click here