AUTOMATIC HEADLIGHT BEAM LEVEL CONTROL SYSTEM, Diagnostic DTC:B2415

DTC Code DTC Name
B2415 Vehicle Speed Sensor Malfunction

DESCRIPTION

The headlight ECU sub-assembly LH receives signals indicating the vehicle speed signal from the brake actuator assembly (skid control ECU) using CAN communication. The headlight ECU sub-assembly LH stores DTC B2415.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
B2415 Vehicle Speed Sensor Malfunction Malfunction in vehicle speed signal
  • Headlight ECU sub-assembly LH

  • Brake actuator assembly (skid control ECU)

-

WIRING DIAGRAM

B005O27E61
*1 Brake Actuator Assembly (Skid Control ECU)
*2 Headlight ECU Sub-assembly LH
*3 CAN Communication Line

CAUTION / NOTICE / HINT

Note


  • Confirm that there are no CAN communication system malfunctions before performing the following inspection.

    Click here

  • If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.

    Click here

PROCEDURE


  1. CLEAR DTC


    1. for Single Beam Headlight:


      1. Clear the DTCs.

        Click here


        Body Electrical > HL AutoLeveling > Clear DTCs
    2. for Triple Beam Headlight:


      1. Clear the DTCs.

        Click here


        Body Electrical > AFS > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT
  2. CHECK FOR DTC


    1. Turn the engine switch on (IG).

    2. for Single Beam Headlight:


      1. Check for DTCs.

        Click here


        Body Electrical > HL AutoLeveling > Trouble Codes
        OK
        DTC B2415 is not output.
    3. for Triple Beam Headlight:


      1. Check for DTCs.

        Click here


        Body Electrical > AFS > Trouble Codes
        OK
        DTC B2415 is not output.
      Result
      Proceed to
      OK
      NG

    OK
    NG
  3. CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      OK
      Vehicle stability control system DTCs are not output.
      Result
      Proceed to
      OK
      NG

    OK
    NG