DESCRIPTION
The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with the state of the front seat inner belt assembly LH.
WIRING DIAGRAM
| *a | Combination Meter Assembly |
| *b | Airbag Sensor Assembly |
| *c | Front Seat Inner Belt Assembly LH |
| *d | CAN Communication Line |
CAUTION / NOTICE / HINT
Note
The seat belt warning system (w/ Occupant Classification System) uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.
PROCEDURE
CHECK DTC OUTPUT (AIRBAG SYSTEM)
Clear the DTCs.
Check for DTCs.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO AIRBAG SYSTEM Click here |
| A |
|
READ VALUE USING GTS
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / SRS Airbag / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Left side Buckle SW | LH buckle switch | Unset, Set or NG | Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- |
| Tester Display |
|---|
| Left side Buckle SW |
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
| A |
|
REPLACE COMBINATION METER ASSEMBLY Click here |
| B |
|
REPLACE FRONT SEAT INNER BELT ASSEMBLY LH Click here |
| C |
|
REPLACE AIRBAG SENSOR ASSEMBLY Click here |