REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seat frame may injure your hands.

PROCEDURE


  1. INSTALL REAR SEAT CUSHION HEATER (SEPARATE TYPE REAR SEAT CUSHION COVER) (w/o Rear No. 2 Seat)

    Tech Tips

    When installing a rear seat cushion heater (separate type rear seat cushion cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B005NPNN01

      Using hog ring pliers, install 20 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seat cushion heater (separate type rear seat cushion cover).

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (separate type rear seat cushion cover).

    2. B005MQ8N01

      Using hog ring pliers, install the rear seat cushion heater (separate type rear seat cushion cover) to the separate type rear seat cushion pad with 6 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seat cushion heater (separate type rear seat cushion cover).

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (separate type rear seat cushion cover).

    3. B005MPBC01
      B005M97 Fastener

      Engage the fastener.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

    Click here

  3. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

    Click here

  4. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH (w/o Rear No. 2 Seat)

    for Manual Seat:

    Click here

  5. INSTALL REAR SEAT COVER CAP LH (w/o Rear No. 2 Seat)

    for Manual Seat:

    Click here

  6. INSTALL POWER SEAT SWITCH ASSEMBLY (w/o Rear No. 2 Seat)

    for Power Seat:

    Click here

  7. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

  8. INSTALL REAR SEAT ASSEMBLY LH (w/o Rear No. 2 Seat)

    Click here

  9. INSTALL REAR SEAT CUSHION HEATER (SEPARATE TYPE REAR SEAT CUSHION COVER) (w/ Rear No. 2 Seat)

    Tech Tips

    When installing a rear seat cushion heater (separate type rear seat cushion cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here


    1. B005PFZN01

      Using hog ring pliers, install 20 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seat cushion heater (separate type rear seat cushion cover).

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (separate type rear seat cushion cover).

    2. B005MEBN01

      Using hog ring pliers, install the rear seat cushion heater (separate type rear cushion cover) to the rear seat cushion pad LH with 6 new hog rings in the order shown in the illustration.

      Note


      • Be careful not to damage the rear seat cushion heater (separate type rear seat cushion cover).

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seat cushion heater (separate type rear seat cushion cover).

    3. B005QEYC01
      B005M97 Fastener

      Engage the fastener.

  10. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/ Rear No. 2 Seat)

    Click here

  11. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here

  12. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH (w/ Rear No. 2 Seat)

    Click here

  13. INSTALL REAR SEAT COVER CAP LH (w/ Rear No. 2 Seat)

    Click here

  14. INSTALL REAR NO. 1 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here