REAR SEATBACK HEATER(for 60/40 Split Seat Type LH Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR SEATBACK HEATER (SEPARATE TYPE REAR SEATBACK COVER) (w/o Rear No. 2 Seat)

   Tech Tips

   When installing a rear seatback heater (separate type rear seatback cover), refer to Precaution in order to prevent wrinkles from forming.

   Click here

   
   

   1. 

      Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 11 new hog rings in the order shown in the illustration.

      Note

      
      

      • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

2. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat)

   Click here

3. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (w/o Rear No. 2 Seat)

   Click here

4. INSTALL REAR SEATBACK COVER LH (w/o Rear No. 2 Seat)

   Click here

5. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

   Click here

6. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/o Rear No. 2 Seat)

   Click here

7. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH (w/o Rear No. 2 Seat)

   for Manual Seat:

   Click here

8. INSTALL REAR SEAT COVER CAP LH (w/o Rear No. 2 Seat)

   for Manual Seat:

   Click here

9. INSTALL POWER SEAT SWITCH ASSEMBLY (w/o Rear No. 2 Seat)

   for Power Seat:

   Click here

10. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

11. INSTALL REAR SEAT ASSEMBLY LH (w/o Rear No. 2 Seat)

    Click here

12. INSTALL REAR SEATBACK HEATER (SEPARATE TYPE REAR SEATBACK COVER) (w/ Rear No. 2 Seat)

    Tech Tips

    When installing a rear seatback heater (separate type rear seatback cover), refer to Precaution in order to prevent wrinkles from forming.

    Click here

    
    

    1. 

       Using hog ring pliers, install 11 new hog rings in the order shown in the illustration.

       Note

       
       

       • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

       • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

    2. 

       Using hog ring pliers, install the rear seatback heater (separate type rear seatback cover) to the separate type rear seatback pad with 2 new hog rings in the order shown in the illustration.

       Note

       
       

       • Be careful not to damage the rear seatback heater (separate type rear seatback cover).

       • Be sure to securely install the hog ring as shown in the illustration while preventing wrinkles from forming on the rear seatback heater (separate type rear seatback cover).

    3. 

       Fastener

       Engage the 2 fasteners.

13. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (w/ Rear No. 2 Seat)

    Click here

14. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here

15. INSTALL REAR SEAT UPPER RECLINING COVER LH (w/ Rear No. 2 Seat)

    Click here

16. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here

17. INSTALL REAR SEATBACK COVER LH (w/ Rear No. 2 Seat)

    Click here

18. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (w/ Rear No. 2 Seat)

    Click here

19. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here

20. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH (w/ Rear No. 2 Seat)

    Click here

21. INSTALL REAR SEAT COVER CAP LH (w/ Rear No. 2 Seat)

    Click here

22. INSTALL REAR NO. 1 SEAT ASSEMBLY LH (w/ Rear No. 2 Seat)

    Click here