REAR SEAT SIDE AIRBAG ASSEMBLY(w/o Rear No. 2 Seat) INSTALLATION

PROCEDURE

1. INSTALL REAR SEAT AIRBAG ASSEMBLY

   
   

   1. Install the rear seat airbag assembly with 2 new nuts.

      Torque:

      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note

      
      

      • Do not reuse the nuts.

      • Make sure that the rear seatback frame sub-assembly is not deformed. If it is deformed, replace it with a new one.

   2. Engage the 3 clamps.

2. INSTALL SEATBACK FELT

   Click here

3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

   Click here

4. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

   Click here

5. INSTALL REAR SEAT SHOULDER BELT COVER (for RH Side)

   Click here

6. INSTALL SEAT BELT ANCHOR COVER CAP (for RH Side)

   Click here

7. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY

   Click here

8. INSTALL REAR SEATBACK COVER

   Click here

9. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for RH Side)

   Click here

10. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (for LH Side)

    Click here

11. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD (for RH Side)

    Click here

12. CONNECT SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD

    Click here

13. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE (for Manual Seat)

    Click here

14. INSTALL REAR SEAT COVER CAP (for Manual Seat)

    Click here

15. INSTALL POWER SEAT SWITCH ASSEMBLY (for Power Seat)

    Click here

16. INSTALL REAR SEAT ASSEMBLY (for LH Side)

    Click here

17. INSTALL REAR SEAT ASSEMBLY (for RH Side)

    Click here

18. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here