FRONT ACCELERATION SENSOR(for LHD) INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR

   
   

   1. Install the acceleration sensor with the 2 nuts.

      Torque:

      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note

      
      

      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

   2. Connect the connector to the acceleration sensor.

2. INSTALL ENGINE STOP AND START ECU (for LH Side)

   w/ Stop And Start System: Click here

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for LH Side)

   Click here

4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for LH Side)

   Click here

5. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LH Side)

   Click here

6. INSTALL INSTRUMENT PANEL GARNISH LH (for LH Side)

   Click here

7. INSTALL COWL SIDE TRIM BOARD LH (for LH Side)

   Click here

8. INSTALL FRONT DOOR SCUFF PLATE LH (for LH Side)

   w/o Rear No. 2 Seat: Click here

   w/ Rear No. 2 Seat: Click here

9. INSTALL ECU INTEGRATION BOX RH (for RH Side)

   Click here

10. INSTALL PARKING ASSIST ECU (for RH Side)

    w/ Panoramic View Monitor System: Click here

11. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RH Side)

    Click here

12. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for RH Side)

    Click here

13. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RH Side)

    Click here

14. INSTALL INSTRUMENT PANEL GARNISH RH (for RH Side)

    Click here

15. INSTALL COWL SIDE TRIM BOARD RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    Click here

16. INSTALL FRONT DOOR SCUFF PLATE RH (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

    w/o Rear No. 2 Seat: Click here

    w/ Rear No. 2 Seat: Click here