RADIO RECEIVER(for Radio and Display Type) INSTALLATION

Info Added 2017-10-06

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. Install the No. 2 radio receiver bracket with the 2 screws to the radio and display receiver assembly.

  2. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. Install the No. 1 radio receiver bracket with the 2 screws to the radio and display receiver assembly.

  3. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET


    1. Connect each connector.

    2. B0048VEC01
      B0048R7 Install in this Direction

      Engage the clips and claws to install the radio and display receiver assembly with bracket as shown in the illustration.

    3. Install the 4 screws.

  4. INSTALL INSTRUMENT PANEL CENTER REGISTER ASSEMBLY

    Click here

  5. INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

    Click here