DOOR CONTROL RECEIVER(for Quarter) REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY

    Click here

  2. REMOVE REAR DOOR SCUFF PLATE LH

    Click here

  3. REMOVE REAR DOOR SCUFF PLATE RH

    Click here

  4. REMOVE REAR SEAT SIDE GARNISH LH

    Click here

  5. REMOVE REAR SEAT SIDE GARNISH RH

    Click here

  6. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH

    Click here

  7. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    Click here

  8. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

    Click here

  9. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

    Click here

  10. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH

    Click here

  11. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

    Click here

  12. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade)

    Click here

  13. REMOVE REAR SEAT SHOULDER BELT HOLE COVER

    Click here

  14. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR COVER

    Click here

  15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade)

    Click here

  16. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)

    Click here

  17. REMOVE DOOR CONTROL RECEIVER (except Separate Type Tire Pressure Warning System)


    1. A01VZH9

      Remove the bolt.

    2. Disengage the guide from the hole to remove the door control receiver.

    3. Disconnect the connector from the door control receiver.

  18. REMOVE DOOR CONTROL AND TIRE PRESSURE MONITORING SYSTEM RECEIVER ASSEMBLY (for Separate Type Tire Pressure Warning System)


    1. A01W1MI

      Remove the 2 bolts.

    2. Disengage the 2 guides from the holes to remove the door control and tire pressure monitoring system receiver assembly.

    3. Disconnect the connector from the door control and tire pressure monitoring system receiver assembly.