GENERATOR(for 150 A Type) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE V-RIBBED BELT

    Click here

  4. REMOVE GENERATOR ASSEMBLY


    1. B001OKP

      Disconnect the connector.

    2. Remove the cap.

    3. Remove the nut and disconnect the wire harness.

    4. Remove the bolt and wire harness clamp bracket.

    5. B001O5J

      Remove the 2 bolts and generator assembly.