CLEARANCE WARNING BUZZER REMOVAL

PROCEDURE


  1. PRECAUTION (w/ Navigation System)

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  6. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

  8. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET

    Click here

  9. REMOVE NO. 1 CLEARANCE WARNING BUZZER


    1. for LHD:


      1. B001NUY

        Disconnect the connector.

      2. Disengage the clamp and remove the No. 1 clearance warning buzzer.

    2. for RHD:


      1. B001O6M

        Disconnect the connector.

      2. Disengage the clamp and remove the No. 1 clearance warning buzzer.