BLIND SPOT MONITOR SENSOR INSTALLATION

PROCEDURE

1. INSTALL BLIND SPOT MONITOR SENSOR LH

   
   

   1. Connect the connector.

   2. Install the blind spot monitor sensor LH with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL BLIND SPOT MONITOR SENSOR RH

   
   

   1. Connect the connector.

   2. Install the blind spot monitor sensor RH with the 3 nuts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. INSTALL REAR BUMPER ASSEMBLY

   Click here

4. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

   Click here

5. PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

   Click here

   SST

   09870-60000   ( 09870-60010 )

   09870-60040

6. PERFORM DIAGNOSTIC SYSTEM CHECK

   Click here