VACUUM WARNING SWITCH REMOVAL

PROCEDURE

1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here

2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

   Click here

3. REMOVE COOL AIR INTAKE DUCT SEAL

   Click here

4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here

5. REMOVE INLET AIR CLEANER ASSEMBLY

   Click here

6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

   Click here

7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

   Click here

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

   Click here

9. REMOVE VACUUM WARNING SWITCH ASSEMBLY

   
   

   1. 

      Disconnect the connector from the vacuum warning switch assembly.

   2. Remove the vacuum warning switch assembly from the brake booster assembly.

10. REMOVE CHECK VALVE GROMMET

    
    

    1. Remove the check valve grommet from the brake booster assembly.