FRONT WIPER MOTOR REMOVAL

PROCEDURE


  1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A01VZCB

      Remove the nut and front wiper arm and blade assembly LH.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A01W472

      Remove the nut and front wiper arm and blade assembly RH.

  3. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01W2NJ

      Disengage the claw and separate the windshield outside moulding LH.

    2. A01W0YR

      Disengage the claw and separate the windshield outside moulding RH.

    3. Disengage the 6 claws and guide as shown in the illustration.

      A01W0EK
    4. Disengage the 8 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

      A01W4YP
  4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. A01W0KS

      Remove the 2 bolts.

    2. A01VZOZE04
      Text in Illustration
      *1 Motor Grommet

      Disconnect the connector.

    3. Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

  5. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01W0HJE04
      Text in Illustration
      *1 Protective Tape
      *2 Windshield Wiper Link No. 1 Rod
      *a Pivot of the windshield wiper motor assembly

      Using a screwdriver, separate the windshield wiper link No. 1 rod from the pivot of the windshield wiper motor assembly as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01VZ4I

      Using a T30 "TORX" socket wrench, remove the 2 bolts and windshield wiper motor assembly from the windshield wiper link assembly.