VACUUM SENSOR ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  3. REMOVE VACUUM SENSOR ASSEMBLY


    1. A01W2AW

      Disengage the 2 clamps.

    2. Remove the nut and wire harness bracket from the brake master cylinder sub-assembly.

    3. A01W0JR

      Disconnect the vacuum sensor assembly connector.

    4. Remove the vacuum sensor assembly from the brake booster assembly.

  4. REMOVE VACUUM SENSOR GROMMET


    1. A01VZMB

      Remove the vacuum sensor grommet from the brake booster assembly.