DRIVING SUPPORT ECU INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL DRIVING SUPPORT ECU ASSEMBLY

   
   

   1. Connect the connector and engage the guide.

   2. Install the driving support ECU assembly with the bolt.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY

   Click here

3. INSTALL INSTRUMENT PANEL BOX DOOR COVER

   Click here

4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

   Click here

5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

6. INSTALL INSTRUMENT SIDE PANEL RH

   Click here

7. INSTALL FRONT DOOR OPENING TRIM COVER RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

8. INSTALL COWL SIDE TRIM BOARD RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

9. INSTALL FRONT DOOR SCUFF PLATE RH

   Tech Tips

   Use the same procedure as for the LH side Click here.

10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    Click here

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSPECT SRS WARNING LIGHT

    Click here