STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  4. REMOVE V-BANK COVER SUB-ASSEMBLY

    Click here

  5. REMOVE INLET NO. 2 AIR CLEANER

    Click here

  6. REMOVE INLET NO. 1 AIR CLEANER

    Click here

  7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click here

  8. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  9. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  10. REMOVE BATTERY

    Click here

  11. REMOVE STARTER ASSEMBLY


    1. B001OMZ

      Disconnect the connector.

    2. Open the cap, remove the nut and disconnect the wire harness.

    3. B001O2X

      Remove the 2 bolts and starter assembly.