STARTER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE COOL AIR INTAKE DUCT SEAL

    Click here

  4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  5. REMOVE INLET AIR CLEANER ASSEMBLY

    Click here

  6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

    Click here

  7. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

    Click here

  8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  9. REMOVE BATTERY

    Click here

  10. REMOVE STARTER ASSEMBLY


    1. B001O4P

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the starter assembly connector.

    4. Remove the 2 bolts and starter assembly.