RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL RADIATOR ASSEMBLY


    1. B001OA6E01
      Text in Illustration
      *1 Guide

      Install the fan assembly to the radiator assembly with the 2 guides at the bottom and 3 claws on the top.

    2. Install the 2 lower radiator supports to the radiator assembly.

    3. B001OM8

      Install the radiator assembly with fan assembly.

      Note

      Do not apply excessive force to the condenser assembly or pipe when installing the radiator assembly.

    4. Install the condenser assembly with the 4 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    5. Connect the 3 clamps and connector.

  2. INSTALL UPPER RADIATOR SUPPORT


    1. Install the 2 radiator support cushions to the radiator assembly.

    2. Install the upper radiator support with the 5 bolts and connect the hood lock control cable clamp to the upper radiator support.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Connect the 3 connectors.

  3. INSTALL HOOD LOCK ASSEMBLY

    Click here

  4. CONNECT NO. 2 TRANSMISSION OIL COOLER HOSE (w/ Oil Cooler)


    1. Connect the No. 2 transmission oil cooler hose.

  5. CONNECT INLET NO. 1 OIL COOLER HOSE (w/ Oil Cooler)


    1. Connect the inlet No. 1 oil cooler hose.

  6. CONNECT NO. 2 RADIATOR HOSE


    1. Connect the No. 2 radiator hose and clamp.

  7. CONNECT NO. 1 RADIATOR HOSE


    1. Connect the No. 1 radiator hose.

  8. INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Install the radiator reserve tank assembly with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the radiator reserve tank hose.

  9. INSTALL INLET NO. 1 AIR CLEANER

    Click here

  10. INSTALL INLET NO. 2 AIR CLEANER

    Click here

  11. INSTALL BATTERY

    Click here

  12. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. ADD ENGINE COOLANT

    Click here

  15. INSPECT FOR COOLANT LEAK

    Click here

  16. INSTALL ENGINE UNDER COVER LH (w/ Front Lower Bumper Absorber)

    Click here

  17. INSTALL ENGINE UNDER COVER LH (w/o Front Lower Bumper Absorber)

    Click here

  18. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

    Click here

  19. INSTALL ENGINE UNDER COVER RH (w/ Front Lower Bumper Absorber)

    Click here

  20. INSTALL ENGINE UNDER COVER RH (w/o Front Lower Bumper Absorber)

    Click here

  21. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here

  22. INSTALL FRONT LOWER BUMPER ABSORBER (w/ Front Lower Bumper Absorber)

    Click here