RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL RADIATOR ASSEMBLY


    1. Engage the 2 guides.

    2. Engage the 3 claws and install the fan assembly to the radiator assembly.

      Note

      Do not damage the radiator assembly when installing the fan assembly.

    3. Install the 2 lower radiator supports to the radiator assembly.

    4. B001OGZ

      Install the radiator assembly with the fan assembly to the vehicle body.

      Note

      Do not apply excessive force to the condenser assembly or pipe when installing the radiator assembly.

    5. Install the condenser assembly to the radiator assembly with the 4 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    6. Engage the 2 clamps.

    7. Connect the cooling fan motor connector and No. 2 cooling fan motor connector.

  2. INSTALL UPPER RADIATOR SUPPORT


    1. Install the 2 radiator support cushions to the radiator assembly.

    2. Install the upper radiator support with the 5 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

    3. Engage the clamp and connect the hood lock control cable assembly to the upper radiator support.

    4. Connect the 2 horn connectors and smog ventilation sensor connector.

  3. INSTALL HOOD LOCK ASSEMBLY

    Click here

  4. CONNECT NO. 2 RADIATOR HOSE


    1. Engage the clamp and connect the No. 2 radiator hose to the fan assembly.

    2. Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.

  5. CONNECT NO. 1 RADIATOR HOSE


    1. Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.

  6. INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Install the radiator reserve tank assembly with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the radiator reserve tank hose.

  7. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

  8. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. ADD ENGINE COOLANT

    Click here

  11. INSPECT FOR COOLANT LEAK

    Click here

  12. INSTALL ENGINE UNDER COVER LH

  13. INSTALL ENGINE UNDER COVER RH

  14. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

  15. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH