RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL RADIATOR ASSEMBLY


    1. B001NOJE01
      Text in Illustration
      *1 Guide

      Install the fan assembly to the radiator assembly with the 2 guides at the bottom and 3 claws on the top.

    2. Install the 2 lower radiator supports to the radiator assembly.

    3. B001NPK

      Install the radiator assembly with fan assembly.

      Note

      Do not apply excessive force to the condenser assembly or pipe when installing the radiator assembly.

    4. Install the condenser assembly with the 4 bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    5. Connect the 2 connectors and the 2 clamps.

  2. INSTALL UPPER RADIATOR SUPPORT


    1. Install the 2 radiator support cushions to the radiator assembly.

    2. Install the upper radiator support with the 5 bolts and connect the hood lock control cable clamp to the upper radiator support.

      Torque:
      13 N*m  { 127 kgf*cm, 9 ft.*lbf }

    3. Connect the 3 connectors.

  3. INSTALL HOOD LOCK ASSEMBLY

    Click here

  4. CONNECT NO. 2 RADIATOR HOSE


    1. Connect the No. 2 radiator hose and clamp.

  5. CONNECT NO. 1 RADIATOR HOSE


    1. Connect the No. 1 radiator hose.

  6. INSTALL RADIATOR RESERVE TANK ASSEMBLY


    1. Install the radiator reserve tank with the 2 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Connect the radiator reserve tank hose.

  7. INSTALL INLET AIR CLEANER ASSEMBLY

    Click here

  8. INSTALL FRONT BUMPER ASSEMBLY

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. ADD ENGINE COOLANT

    Click here

  11. INSPECT FOR COOLANT LEAK

    Click here

  12. INSTALL ENGINE UNDER COVER LH

  13. INSTALL ENGINE UNDER COVER RH

  14. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

  15. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH