FUEL PUMP ECU INSTALLATION

PROCEDURE

1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY

   
   

   1. Connect the fuel pump control ECU assembly connector.

   2. Install the fuel pump control ECU assembly with the 2 nuts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH

   Click here

3. INSTALL ROPE HOOK (for LH Side)

   Click here

4. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for LH Side)

   Click here

5. INSTALL REAR FLOOR FINISH PLATE

   Click here

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (for Rear Side)

   Click here

7. INSTALL SPARE WHEEL COVER PAD RH

   Click here

8. INSTALL SPARE WHEEL COVER PAD LH

   Click here

9. INSTALL LUGGAGE COMPARTMENT FLOOR MAT

   Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.