ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

   
   

   1. Install a new gasket onto the engine coolant temperature sensor.

   2. Using a 19 mm ball joint lock nut wrench, install the engine coolant temperature sensor.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a ball joint lock nut wrench Click here.

      Tech Tips

      Perform "Inspection After Repair" after replacing the engine coolant temperature sensor Click here.

   3. Connect the engine coolant temperature sensor connector.

   4. Connect the 2 engine wire clamps.

2. ADD ENGINE COOLANT

   Click here

3. INSPECT FOR COOLANT LEAK

   Click here

4. INSTALL COOL AIR INTAKE DUCT SEAL

   Click here

5. INSTALL V-BANK COVER SUB-ASSEMBLY

   Click here

6. INSTALL ENGINE UNDER COVER RH

7. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

8. INSTALL ENGINE UNDER COVER LH

9. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH