VACUUM SWITCHING VALVE(for Engine Mounting) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (- ) battery terminal notices before proceeding with work Click here.

  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  3. REMOVE ENGINE UNDER COVER RH

  4. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  5. REMOVE ENGINE UNDER COVER LH

  6. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. REMOVE DUTY VACUUM SWITCHING VALVE


    1. B001OE3

      Disconnect the 2 vacuum hoses from the duty vacuum switching valve.

    2. Disconnect the hose.

    3. B001O1Y

      Disconnect the vacuum hose and duty vacuum switching valve connector.

    4. Remove the bolt and duty vacuum switching valve.