HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

   
   

   1. Temporarily install the rear height control sensor sub-assembly with the 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Install the rear height control sensor sub-assembly with the nut.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   3. Connect the connector.

   4. Engage the clamp.

2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

   Click here

4. ADJUST HEADLIGHT AIMING

   Click here