SLIDING ROOF HOUSING(for Standard) REMOVAL

PROCEDURE


  1. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  2. REMOVE SLIDING ROOF SIDE GARNISH LH


    1. A01W43F

      Disengage the 2 claws and remove the sliding roof side garnish LH.

  3. REMOVE SLIDING ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY


    1. A01W32N

      Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

      Note

      To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass sub-assembly.

  5. REMOVE SLIDING ROOF WEATHERSTRIP


    1. Remove the sliding roof weatherstrip from the sliding roof panel sub-assembly.

  6. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

    Click here

  7. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  8. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. A01W35U

      Expand the clip and disconnect the sliding roof drain hose.

      Tech Tips

      Use the same procedure for the other 3 sliding roof drain hoses.

    2. Disengage the 2 clamps.

      A01W21W

    3. Remove the 8 bolts, 8 nuts and sliding roof housing sub-assembly.