COOLER EXPANSION VALVE REMOVAL

PROCEDURE


  1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  3. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY

    for LHD: Click here

    for RHD: Click here

  4. DISCONNECT SUCTION PIPE SUB-ASSEMBLY

    Click here

  5. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY

    Click here

  6. REMOVE COOLER EXPANSION VALVE


    1. A01W1VP

      Using a 4 mm hexagon wrench, remove the 2 hexagon bolts.

    2. A01W0LNE03
      Text in Illustration
      *a Bolt for Suction Pipe Sub-assembly

      Temporarily install the bolt for the suction pipe sub-assembly halfway to the cooler expansion valve.

    3. A01W08U

      Hold the bolt and pull it to remove the cooler expansion valve as shown in the illustration.

    4. A01W2L1E03
      Text in Illustration
      *1 No. 1 Cooler Evaporator Sub-assembly

      Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.