SEAT HEATER SWITCH(for Rear Side) INSTALLATION

PROCEDURE

1. INSTALL COOLER CONTROL SWITCH ASSEMBLY

   
   

   1. Engage the 4 claws to install the cooler control switch assembly to the rear center seat armrest panel sub-assembly.

   2. Connect the 2 connectors.

2. INSTALL REAR CENTER SEAT ARMREST PANEL SUB-ASSEMBLY

   Click here

3. INSTALL REAR CENTER SEAT ARMREST DOOR SUB-ASSEMBLY

   Click here

4. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY

   Click here

5. INSTALL REAR CENTER SEAT ARMREST HINGE

   Click here

6. INSTALL REAR CENTER SEAT ARMREST ASSEMBLY WITH BOX

   Click here

7. INSTALL REAR SEATBACK ASSEMBLY

   Click here

8. INSTALL REAR SEAT CUSHION ASSEMBLY

   Click here

9. INSTALL REAR SEAT HEADREST ASSEMBLY

10. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. INSPECT SRS WARNING LIGHT

    Click here