VALVE BODY ASSEMBLY REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Click here

  2. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  3. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. Remove the drain plug and gasket, and drain the ATF.

    2. Install the drain plug and a new gasket.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  4. REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY

    Click here

  5. REMOVE TRANSMISSION OIL CLEANER MAGNET

    Click here

  6. REMOVE VALVE BODY OIL STRAINER ASSEMBLY

    Click here

  7. DISCONNECT TRANSMISSION WIRE

    Click here

  8. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. A004K2J

      Remove the bolt, detent spring cover and the detent spring.

    2. A004JK8

      Remove the 19 bolts and the transmission valve body assembly.

    3. A004K4WE12
      Text in Illustration
      *1 Manual Valve Connecting Rod Sub-assembly
      *2 Manual Valve Lever Sub-assembly

      Disconnect the manual valve connecting rod sub-assembly from the manual valve lever sub-assembly.

    4. A004I44E34
      Text in Illustration
      *1 Check Ball Body
      *2 Compression Spring

      Remove the check ball body and the compression spring.

      Note

      Do not drop the check ball body and compression spring.