POWER WINDOW REGULATOR MOTOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL POWER WINDOW REGULATOR MOTOR ASSEMBLY

   
   

   1. Temporarily install the power window regulator motor assembly with the bolt.

   2. Temporarily install the housing cap with the 2 bolts.

   3. Tighten the 3 bolts to install the power window regulator motor assembly.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Tech Tips

      When replacing a power window regulator motor assembly, a new power window regulator motor assembly uses self-tapping screws to thread new installation holes when the self-tapping screws are inserted.

2. INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

   Click here

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

4. INSTALL FRONT DOOR UPPER WINDOW STOP

   Click here

5. INSPECT FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

6. ADJUST FRONT DOOR GLASS SUB-ASSEMBLY

   Click here

7. INSTALL FRONT DOOR SERVICE HOLE COVER

   Click here

8. INSTALL OUTER MIRROR INSTALL HOLE COVER

   Click here

9. INSTALL FRONT DOOR TRIM BRACKET

   Click here

10. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

    Click here

11. INSTALL FRONT DOOR NO. 1 STIFFENER CUSHION

    Click here

12. INSTALL COURTESY LIGHT ASSEMBLY

    Click here

13. INSTALL DOOR TRIM COVER

    Click here

14. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

15. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

    Click here

16. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG

    Click here

17. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

18. INSTALL BATTERY SERVICE HOLE COVER LH

    Click here

19. INITIALIZE POWER WINDOW CONTROL SYSTEM

    Click here

20. INSPECT POWER WINDOW OPERATION

    Click here