РАБОЧИЙ ЦИЛИНДР СЦЕПЛЕНИЯ (для моделей с 1GR-FE) УСТАНОВКА


  1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY

    A01E0XB

    1. Install the clutch release cylinder with the 2 bolts.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  2. CONNECT CLUTCH RELEASE CYLINDER FLEXIBLE TUBE

    A01E025

    1. Using a union nut wrench, connect the flexible tube.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

    2. Install the 2 way with the bolt.

      Torque:
      19 N*m  { 194 kgf*cm, 14 ft.*lbf }
    3. A01E0DE

      Using a union nut wrench, install the flexible tube.

      Torque:
      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  3. INSTALL RELEASE CYLINDER HEAT INSULATOR

    A01E0W2

    1. Install the insulator with the bolt and nut.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  4. BLEED AIR FROM CLUTCH PIPE LINE

    Click here

  5. CHECK FOR CLUTCH FLUID LEAKAGE

  6. CHECK FLUID LEVEL IN RESERVOIR

    Жидкость
    Изготовитель Жидкость
    Для моделей производства TSAM SAE J1704 или FMVSS № 116 DOT 4
    Кроме моделей производства TSAM SAE J1703 или FMVSS № 116 DOT 3