ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) INSTALLATION

PROCEDURE

1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

   Note

   Do not reuse dropped or damaged parts.

   
   

   1. Connect the connector.

   2. Attach the clamp to install the No. 3 indoor electrical key antenna assembly.

2. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

   Click here

3. INSTALL NO. 2 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

   Click here

4. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/o Spare Tire)

   Click here

5. INSTALL NO. 1 TOOL BOX SUB-ASSEMBLY (w/ Spare Tire)

   Click here

6. INSTALL DECK FLOOR BOX LH (w/o Spare Tire)

   Click here

7. INSTALL DECK FLOOR BOX LH (w/ Spare Tire)

   Click here

8. INSTALL DECK FLOOR BOX RH (w/o Spare Tire)

   Click here

9. INSTALL DECK FLOOR BOX RH (w/ Spare Tire)

   Click here

10. INSTALL NO. 1 SPARE WHEEL CARRIER (w/ Spare Tire)

11. INSTALL SPARE TIRE (w/ Spare Tire)

    Click here

12. INSTALL REAR DECK FLOOR BOX (w/ Spare Tire)

    Click here

13. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY

    Click here

14. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY

    Click here

15. INSTALL DECK BOARD ASSEMBLY

    Click here

16. INSTALL TONNEAU COVER ASSEMBLY

    Click here

17. INSTALL REAR SEAT ASSEMBLY (for Manual Seat)

    Click here

18. INSTALL REAR SEAT ASSEMBLY (for Power Seat)

    Click here