VACUUM SENSOR ASSEMBLY INSTALLATION

PROCEDURE


  1. INSTALL VACUUM SENSOR GROMMET


    1. Install a new vacuum sensor grommet to the brake booster assembly.

  2. INSTALL VACUUM SENSOR ASSEMBLY


    1. for LHD:


      1. B006GSMC01
        *a 70 to 110°
        B006AHR Connector
        B006EC9 Vacuum Sensor Assembly

        Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.

      2. Connect the connector to the vacuum sensor assembly.

    2. for RHD:


      1. B006FKLC01
        *a 70 to 110°
        B006AHR Connector
        B006EC9 Vacuum Sensor Assembly

        Install the vacuum sensor assembly to the brake booster assembly so that the vacuum sensor assembly is angled as shown in the illustration.

      2. Connect the connector to the vacuum sensor assembly.

  3. INSTALL FENDER APRON BRACE SUB-ASSEMBLY LH (for LHD)

    Click here

  4. INSTALL FENDER APRON BRACE SUB-ASSEMBLY RH (for RHD)

    Click here

  5. INSTALL UPPER RADIATOR SUPPORT SEAL (for LHD)

    Click here

  6. INSTALL RADIATOR COVER PLATE (for RHD)

    Click here