PARK / NEUTRAL POSITION SWITCH REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. B008IGV

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    3. Remove the clip and disconnect the transmission control cable assembly from the No. 1 transmission control cable bracket.

  3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. B008HEA

      Disconnect the connector.

    2. B008HDO

      Remove the nut, washer and control shaft lever from the park/neutral position switch assembly.

    3. B008HFU

      Using a screwdriver, pry out the lock plate and remove the lock nut and lock plate from the park/neutral position switch assembly.

    4. B008IH7

      Remove the 2 bolts and park/neutral position switch assembly from the continuously variable transaxle assembly.