VACUUM SENSOR REMOVAL

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

    Click here

  2. REMOVE NO. 2 TURBO PRESSURE SENSOR (for Bank 2)


    1. B006EQF

      Disconnect the No. 2 turbo pressure sensor connector.

    2. B006BGF

      Remove the bolt and No. 2 turbo pressure sensor.

    3. Slide the clip and disconnect the vacuum hose from the No. 2 turbo pressure sensor.

  3. REMOVE NO. 2 TURBO PRESSURE SENSOR (for Bank 1)


    1. B006DC7

      Disconnect the No. 2 turbo pressure sensor connector.

    2. B006C31

      Remove the bolt and No. 2 turbo pressure sensor.

    3. Slide the clip and disconnect the vacuum hose from the No. 2 turbo pressure sensor.