SEAT HEATER CONTROL(for Front Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • Wear protective gloves. Sharp areas on the parts may injure your hands.

  • There is risk of injury.

B006B4P

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE


  1. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY LH


    1. B006ASPC01
      B006DHE Install in this Direction

      Attach the claw and install the seat heater control sub-assembly LH.

    2. w/ Ottoman:


      1. B006D77C33
        *a

        Component without harness connected

        (Ottoman Motor (Front Seat Cushion Adjuster Assembly))

        Connect the No. 4 terminal of the ottoman motor to the positive (+) battery terminal, and the No. 1 terminal to the negative (-) battery terminal and then adjust the length of the cushion to the rearmost position.

      2. B006FU3

        Connect the connector of the ottoman motor.

    3. B006D77C33
      *a

      Component without harness connected

      (Rear Lifter Motor (Front Seat Adjuster Assembly))

      Connect the No. 4 terminal of the rear lifter motor to the positive (+) battery terminal, and the No. 1 terminal to the negative (-) battery terminal and then raise the cushion height to the lowermost position.

    4. B006G2F

      Connect the connector of the rear lifter motor.

    5. B006D77C33
      *a

      Component without harness connected

      (Front Vertical Motor (Front Seat Adjuster Assembly))

      Connect the No. 4 terminal of the front vertical motor to the positive (+) battery terminal, and the No. 1 terminal to the negative (-) battery terminal and then raise the cushion height to the lowermost position.

    6. B006AQL

      Connect the connector of the front vertical motor.

  2. INSTALL SEAT CHECK VALVE WITH HOSE LH (w/ Refresh Seat)

    Click here

  3. INSTALL FRONT SEAT FRONT CUSHION SHIELD LH

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  5. INSTALL FRONT POWER ADJUSTER SHIELD LH

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)

    Click here

  7. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY

    Click here

  9. INITIALIZATION OF SEAT ECU

    Click here

  10. INSPECT FRONT SEAT ASSEMBLY

    Click here

  11. CHECK SRS WARNING LIGHT

    Click here

  12. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  13. INSPECT SEAT HEATER SYSTEM

    Click here

  14. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)

    Click here

  15. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here