CAMSHAFT OIL CONTROL VALVE(for Bank 1) ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

Note

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click here

PROCEDURE


  1. REMOVE CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH

    Click here

  2. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (EXHAUST CAMSHAFT TIMING GEAR BOLT ASSEMBLY)


    1. B006FTDC01
      *a Plunger

      Check the stroke of the plunger in the center of the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

      Standard Stroke
      2.2 mm (0.0866 in.) or more

      Tech Tips

      If the result is not as specified, replace the camshaft timing oil control valve assembly (exhaust camshaft timing gear bolt assembly).

  3. INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY RH

    Click here