HEADREST ADJUSTER(for Rear Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:


  • B006C5U

    Wear protective gloves. Sharp areas on the parts may injure your hands.

  • This may result in injury.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT HEADREST ADJUSTER SUB-ASSEMBLY


    1. B005V53

      Install the connector holder to the rear No. 2 headrest adjuster.

    2. B005RKO

      Align the guide and install the plate with the screw.

    3. B005QYGC01
      B006DHE Install in this Direction

      Install the 2 pins.

    4. B005RA2

      Install the rear No. 1 seat headrest adjuster sub-assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR SEATBACK MAIN FRAME SUB-ASSEMBLY LH

    Click here

  4. INSTALL REAR SEATBACK MAIN FRAME SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY LH

    Click here

  6. INSTALL LUMBER SUPPORT PUMP SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL REAR SEAT WIRE LH

    Click here

  8. INSTALL REAR SEAT WIRE RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL SEATBACK CHECK VALVE WITH BRACKET LH

    Click here

  10. INSTALL SEATBACK CHECK VALVE WITH BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL REAR SEAT HEADREST SUPPORT

    Click here

  12. INSTALL REAR SEAT HEADREST ASSEMBLY LH

    Click here

  13. INSTALL REAR SEAT HEADREST ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  14. INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)

    Click here

  15. INSTALL NO. 2 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  16. INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE LH (w/ Refresh Seat)

    Click here

  17. INSTALL NO. 1 SEATBACK CHECK VALVE WITH HOSE RH (w/ Refresh Seat)

    Tech Tips

    Use the same procedure described for the LH side.

  18. INSTALL REAR SEATBACK ASSEMBLY LH

    Click here

  19. INSTALL REAR SEATBACK ASSEMBLY RH

    Click here

  20. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  21. INSTALL REAR SEAT CUSHION ASSEMBLY LH

    Click here

  22. INSTALL REAR SEAT CUSHION ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Click here

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  24. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY

    Click here

  25. INITIALIZATION OF SEAT ECU

    Click here

  26. INSPECT SRS WARNING LIGHT

    Click here

  27. INSPECT REAR SEAT ASSEMBLY

    Click here

  28. INSPECT SEAT HEATER SYSTEM

    Click here

  29. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  30. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  31. INSPECT SEAT VIBRATION SYSTEM (w/ Refresh Seat)

    Click here