ECM INSTALLATION


  1. INSTALL NO. 2 ECM BRACKET

    A01DZ30E01

    1. Install the bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 ECM BRACKET

    A01DY46E01

    1. Install the bracket with the 3 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL ECM

    A01DX14

    1. Install the ECM with the bolt and 2 nuts.

      Torque:
      12.5 N*m  { 128 kgf*cm, 9 ft.*lbf }

    2. Connect the 4 connectors.

  4. INSTALL TRANSMISSION CONTROL ECU ASSEMBLY (for Automatic Transmission)

    A01E2BE

    1. Install the TCM with the 2 bolts.

      Torque:
      12.5 N*m  { 128 kgf*cm, 9 ft.*lbf }

    2. Connect the 3 connectors.

  5. REMOVE TURBO MOTOR DRIVER


    1. A01DYX9

      Install the turbo motor driver with the bolt.

      Torque:
      12.5 N*m  { 128 kgf*cm, 9 ft.*lbf }

    2. Connect the connector.

  6. INSTALL 4WD CONTROL ECU (w/ A.D.D.)

    A01E0FK

    1. Install the 4WD control ECU with the bolt.

      Torque:
      12.5 N*m  { 128 kgf*cm, 9 ft.*lbf }

    2. Connect the connector.

  7. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01E050E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01E1H5E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  9. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

  10. PERFORM REGISTRATION (w/ EGR Cooler)


    1. Perform registration Click here.

  11. PERFORM REGISTRATION (w/o EGR Cooler)


    1. Perform registration Click here.

  12. START ENGINE (w/ EGR Cooler)

    Note

    After replacing the ECM, the new ECM needs to be initialized Click here.

  13. START ENGINE (w/o EGR Cooler)

    Note

    After replacing the ECM, the new ECM needs to be initialized Click here.