FRONT SEAT CUSHION HEATER INSTALLATION


  1. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (for TMMK Made)


    1. A01HMA7

      Using a tacker, install the front seat cushion heater assembly to the separate type front seat cushion cover with 20 new tag pins.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (for TMMK Made)


    1. A01HPMQ

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 12 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  3. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for TMMK Made)


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. for Driver Side:


      1. A01HQUB

        Install the separate type front seat cushion cover.

    4. for Front Passenger Side:


      1. A01HQAZ

        Install the separate type front seat cushion cover.

    5. A01HNRZE01

      Engage the claw (D) and 3 clamps (C) to install the front seat airbag assembly wire harness.

    6. Engage the clamp (B).

    7. Connect the connector (A).

    8. w/ Seat Heater System:


      1. Connect the connector (E).

      2. Engage the clamp (F).

  4. INSTALL FRONT SEAT INNER CUSHION SHIELD (for TMMK Made)


    1. Install the front seat inner cushion shield with the 2 screws.

      Torque:
      0.6 N*m  { 6 kgf*cm, 5 in.*lbf }
  5. INSTALL FRONT POWER SEAT SWITCH (for TMMK Made)

    Click here

  6. INSTALL FRONT SEAT CUSHION HEATER ASSEMBLY (for SIA Made)


    1. Using a tacker, install the front seat cushion heater assembly to the separate type front seat cushion cover with 34 new tag pins.

  7. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER (for SIA Made)


    1. A01HPHV

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. A01HQQZ

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  8. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (for SIA Made)


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. w/ Seat Heater System:


      1. Engage the 2 clamps to install the seat heater wire harness.

      2. Connect the connector.

      3. Engage the clamp.

      4. Connect the connector.

    4. Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.

    5. Engage the fastener to secure the front seat airbag assembly wire harness.

  9. INSTALL FRONT SEAT INNER CUSHION SHIELD (for SIA Made Driver Side)


    1. Engage the 5 claws and 6 guides to install the front seat inner cushion shield.

  10. INSTALL FRONT SEAT INNER CUSHION SHIELD (for SIA Made Front Passenger Side)


    1. Engage the 5 claws and 7 guides to install the front seat inner cushion shield.

  11. INSTALL FRONT SEAT CUSHION SHIELD (for SIA Made Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  12. INSTALL FRONT SEAT CUSHION SHIELD (for SIA Made Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  13. INSTALL NO. 1 FRONT SEAT INNER CUSHION SHIELD (for SIA Made)


    1. A01HPEA

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    2. A01HQIV

      Engage the 2 claws to install the clip to the front No. 1 seat inner cushion shield as shown in the illustration.

    3. Install the screw.

  14. CONNECT SEPARATE TYPE FRONT SEATBACK COVER (for SIA Made)


    1. Connect the rubber band of the separate type front seatback cover.

  15. INSTALL FRONT SEAT ASSEMBLY (for SIA Made)

    Click here